Wooden Floor Waxing & Polishing Services In Karen

WOODEN FLOOR MAINTENANCE

Think about the beating your wood floors endure daily: high heels, pet nails, children’s toys, and shifting furniture, to name a few! Tough as wood floors may be, their finish is still susceptible to scratches and scuffs. Refinishing—the process of sanding floors down entirely to apply a new surface finish—is costly and only necessary every few decades. But wooden floor waxing & polishing services in Karen with a product specifically formulated for your floors is an easy, inexpensive way to regain shine, even out imperfections, and extend the life of your handsome hardwood. All it takes is a flat-head mop with a microfiber cleaning pad and commercial wood floor polish, which comes in low- or high-gloss sheens, to achieve your desired look.

Whether or not you should polish your floors, however, depends on their finish. Those with a protective surface—a waterproof barrier such as urethane, for example—will benefit from polish, but floors with penetrating finishes like tung oil or unsealed wood require wax instead of polish. Using the wrong product can cause a host of problems, from making floors too slick to dulling the finish and impairing proper refinishing down the road. So it’s important to determine which kind of floor you have (see Step 1 in this guide on how to polish wood floors) before you dive in and cause damage.

1. Wooden Floor Polishing  Procedure

TOOLS and MATERIALS
Sponge mop
Hardwood floor cleaner
Broom
Dustpan
Microfiber mop pad
Wood floor polish
Floor Scrubber machine

Step 1: Test the finish on your wood floors.
If you’re unsure what type of finish is on your floor, scrape off a tiny bit from an inconspicuous area with a sharp knife blade.

If the finish is smudged but no clear material is scraped up, your floor probably has a penetrating finish. Stop here, and do not polish these wood floors; these should only be waxed.
If you see a clear material, your flooring likely has a surface finish. It’s safe to polish these wood floors. Still, be sure to test out the polish in a small, hidden, or inconspicuous location on the wood before tackling the entire floor.

Step 2: Clear and clean your wood floors of dust and dirt.
Empty the room, removing as much furniture as possible, then clean the floor thoroughly to remove dust and dirt. Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.

STEP 3: Wooden floor Polishing in Nairobi to a shine.
Begin in a back corner of the room, plotting a path that will have you end up near an exit. Pour a small S-shaped amount of wood floor polish onto the floor.

Using a flat-surface mop, work the solution back and forth in the direction of the wood grain, smoothing out any air bubbles. Work in small areas (about three to five feet wide in either direction) to best control the amount of polish you’ve applied.

While you must make sure to completely coat the floor, thin layers will dry more rapidly than thick ones, and you can always apply another coat if needed.

Note: Polish can stain drywall and baseboards, so avoid splashing on these areas.

Step 4: Hold off restoring the room for at least a day.
Wait at least one hour before allowing light traffic through the room and a full day before moving your belongings back in and resuming normal use. To avoid scratching, take care not to drag or slide furniture; pick up each piece and place them where they belong. Attach felt furniture pads underneath heavy pieces for extra protection.

Step 5: Follow a few precautions to keep wood floors looking great, and you can put off your next polishing job!
Now that your floors look like new, maintain them by placing rugs at entry doors to prevent dirt from being tracked inside. If your kitchen has wood flooring, place a rug in the sink to catch stray drops of water.

Stick to a regular cleaning routine, vacuuming weekly and giving the floors a deep clean monthly. Skip any homemade cleaning solutions that include diluted vinegar or ammonia on wood floors—all they’ll do is dull a surface-finished floor. Instead, for a better all-natural approach, check out our homemade wood floor cleaner, which features castile soap.

These measures will go a long way toward preserving your wood floor’s shine. You may still want to repeat the polishing process a few times annually, as needed, but don’t exceed four applications per yea

2. WOODEN FOOR WAXING

Process of Wooden Floor Waxing

Wooden floor waxing is a process that involves applying a protective and glossy layer of wax to wooden floors. This enhances their appearance, fills scratches, and provides several functional benefits. Here’s a detailed process for waxing wooden floors, along with the advantages:

Process

1. Preparation:
   • Clear the Area: Remove all furniture and rugs from the room.
   • Clean the floor: Sweep or vacuum to remove dust and debris. Use a damp mop with a wood-safe cleaner to remove stains or grime.
   • Dry the Floor: Ensure the floor is completely dry before proceeding with the wax application.
2. Stripping the top layer of dirt:
   • If there is old wax buildup or dirt, use a wax stripper or a combination of water and ammonia.
   • Scrub the floor gently with a scrubbing machine.
   • Rinse the floor with clean water and let it dry completely.
3. Applying the wax:
   • Choose the right wax. Select a wax suitable for your type of wooden floor (e.g., paste wax or liquid wax).
   • Test a Small Area: Apply wax to a small, inconspicuous area to ensure compatibility.
   • Application: Apply a thin, even layer of wax using a clean cloth or a waxing applicator. Work in small sections to ensure even coverage.
   • Buffing: After applying the wax, let it dry according to the product’s instructions (usually 20–30 minutes). Then, use a clean, dry cloth or a buffing machine to buff the floor to a shine.
   • Additional Coats: For best results, apply a second coat of wax, allowing the first coat to dry completely before reapplying.
4. Final Buffing:
   • After the final coat of wax has dried, buff the floor again to achieve a smooth, glossy finish.

Advantages of Wooden Floor Waxing

1. Enhanced Appearance:
   • Waxing provides a rich, glossy finish that enhances the natural beauty and grain of wooden floors.
   • It gives the floor a warm and inviting look.
2. Protection:
   • Wax acts as a protective barrier against scratches, scuffs, and minor abrasions.
   • It helps repel water and stains, preventing damage from spills and moisture.
3. Improved Durability:
   • Regular waxing extends the lifespan of wooden floors by reducing wear and tear.
   • It maintains the floor’s structural integrity by preventing cracks and splits caused by dryness.
4. Ease of Maintenance:
   • Waxed floors are easier to clean and maintain. The wax makes it simpler to wipe away dirt and spills.
   • Minor scratches and scuffs can be easily buffed out without needing a full refinish.
5. Cost-Effective:
   • Waxing is a relatively inexpensive way to maintain and protect wooden floors compared to other treatments like polyurethane.
   • It reduces the frequency of costly repairs and refinishing.
6. Eco-Friendly:
   • Many floor waxes are made from natural ingredients, making them a more environmentally friendly option compared to synthetic floor treatments.
7. Restoration of Old Floors:
   • Waxing can rejuvenate older wooden floors, restoring their original luster and beauty without the need for sanding and refinishing.
   • It is also cheaper compared to sanding and furnishing.

Disadvantages: It has to be done every 6 months to one year.

It will take one day to wax and dry

3. WOODEN FLOOR SANDING AND VANISHING

Sanding and polishing floors usually involves three stages: preparation, sanding, and coating with a protective sealant. polishing floor The sanded floor is vacuumed and then coated with solvent-based polyurethane or other sealants, such as water-based products or oil. Three coats are applied to each coating material. Benefits of Sanding and Polishing Professionally sanded floors can add thousands of dollars to the value of your house and can enhance the look of a modern or older-style home. But is costly compared to waxing & polishing

Process of Wooden Floor Sanding and Furnishing

Wooden floor sanding and furnishing is a meticulous process that can significantly enhance the appearance and durability of your floors. Here’s a step-by-step guide to the process:

1. Preparation:

• Clear the Area: Remove all furniture, rugs, and other items from the room.
• Check for Nails and Staples: Inspect the floor for any nails, staples, or screws that are protruding and could damage the sanding equipment. Remove or countersink them.

2. Sanding:

• Rough Sanding: Start with coarse-grit sandpaper (36–40 grit) to remove the old finish and any surface imperfections. Use a drum sander for the main floor area and an edge sander for corners and edges.
• Intermediate Sanding: Switch to medium-grit sandpaper (60–80 grit) to smooth out scratches from the coarse sanding and further even out the surface.
• Fine Sanding: Finish with a fine-grit sandpaper (100–120 grit) to achieve a smooth, even surface. This step ensures the floor is ready for the finish to be applied.

3. Cleaning:

• Vacuum Thoroughly: Use a powerful vacuum to remove all dust and debris from the sanding process.
• Tack Cloth: Wipe the floor with a tack cloth to pick up any remaining dust particles.

4. Staining (Optional):

• Apply Stain: If you desire a specific color, apply a wood stain following the manufacturer’s instructions. Use a clean cloth or applicator pad to ensure an even application. Allow it to dry completely.

5. Finishing:

• Seal the Floor: Apply a wood floor sealant to protect the wood and provide a base for the finish.
• Apply Finish: Use a high-quality polyurethane or water-based finish. Apply in thin, even coats using a brush or roller. Allow each coat to dry as per the manufacturer’s recommendations.
• Buff Between Coats: Lightly buff the floor with a fine-grit sanding screen between coats to ensure a smooth finish. Clean the dust before applying the next coat.
• Final Coat: Apply the final coat and allow it to cure completely before moving furniture back into the room.

Advantages of Wooden Floor Sanding and Furnishing

1. Enhanced Appearance:

• Restores Beauty: Sanding removes scratches, dents, and discoloration, restoring the wood’s natural beauty.
• Customizable Finish: Choose from various stains and finishes to match your décor and preferences.

2. Increased Durability:

• Protection: A fresh finish provides a protective layer against wear, spills, and scratches.
• Longevity: Proper sanding and finishing can extend the life of your wooden floors, making them last for decades

In summary, wooden floor sanding and furnishing not only rejuvenate the look of your floors but also enhance their durability and value. By following a thorough process and reaping the numerous benefits, you can enjoy beautiful, long-lasting wooden floors in your home.

Disadvantages of Wooden Floor Sanding and Furnishing

While sanding and finishing wooden floors have many benefits, there are also some disadvantages to consider:

1. Cost:

• Initial Expense: The process can be expensive. Costs include labor, materials, and potential repairs.

2. Time-Consuming:

• Preparation and Drying Time: The process requires significant preparation, multiple sanding passes, and drying time between finish coats. This can take several days or even longer for larger areas.
• Inconvenience: During the process, the room or area must be vacated, which can disrupt daily activities and living arrangements.

3. Dust and fumes:

• Dust Generation: Sanding generates a large amount of dust, which can be challenging to contain and clean up. Dust can affect air quality and settle on furniture and other surfaces.

In summary, while wooden floor sanding and finishing can greatly enhance the appearance and longevity of your floors, it is important to weigh these disadvantages. Considering factors like cost, time, health risks, and potential for damage can help you make an informed decision about whether this process is right for your home.